To maintain bike engines from overheating in Summer: Most of the areas of north-western India including Delhi, Punjab, Haryana, Rajasthan, western UP are in the grip of severe heat. In some of these areas, the temperature has been recorded close to 50 degrees. In the summer season, complaints of overheating in bikes or scooters are heard. However, in most cases, overheating of the engine is not a matter of concern, because at present many modern bikes are based on liquid-cooled technology, which is effective in removing heat from the engine and maintaining them at optimum temperature.
In this summer season, after riding a bike for a short distance, the engine gets so hot that the heat of the engine is felt even in your feet, so to protect the two-wheeler from overheating, you can adopt these maintenance tips.
bike radiators, Check the coolant and fan regularly
Liquid cooled technology based engines (ICE- Internal Combustion Engine) have a radiator and coolant which is pumped through the engine to remove heat. It also has a fan which gets activated after a certain temperature to remove excess heat. When all three components work properly, So there is no complaint of engine overheating.If there is a problem with any of the radiator, coolant or fan, Then the engine may overheat.
One way to avoid overheating of the bike engine is to keep checking the coolant from time to time. Check the level, and top it up if necessary. Also, If the problem persists, So flush the coolant and refill it, Ensuring there are no air blockages. Use good quality coolant.
The radiator and fan are also worth checking. Check the radiator for leaks or crushed fins. If you notice a short in either, So get the radiator repaired by a knowledgeable person and if the damage is too much, then replace it. Same goes for the fan and if the fan refuses to start, Then it could be a problem with the thermostat switch.
Change the liquid fluid periodically
Engine oil plays an important role in protecting the engine from overheating for a certain period of time, So make sure you use the appropriate oil from time to time.Let’s change.Use good quality engine oil and do what is recommended by the company.
In most modern bikes the engine, There is one oil for the clutch and gearbox, Although, Some older bikes like the old Enfields have engines, There are different oils for clutch and gearbox, So make sure they are also replaced when the bike is serviced.
Turn off limiter
Another way to prevent the engine from overheating is to drive sensibly and avoid exceeding the rev limiter in every gear or while idling. Higher revs cause more heat and the engine components have to work extra hard to dissipate the heat, So do not over-rev the bike. Doing so can not only damage the engine, But it can also damage the clutch and other parts of the bike.